Science Experiments

Laser diffraction

Thu, 24th Jun 2010

Listen Now    Download as mp3 from the show Lasers in Medicine

What you Need

Laser Pointer

Cling film

Silica gel

Interestingly shaped or patterned plastic

What to do

Do not shine the laser in your own or any one else's eyes

Shine the laser through each of the objects and look at the patterns produced.

Try shining the laser through a slit in a piece of paper.

What may happen

The slit produces a series of spots on the wall at right angles to the slit. The other objects will produce a variety of different patterns.


Diffraction from a slit, silica gel, a bottle covered in condensation and a cd

Why does it happen?

Light is an electro-magnetic wave, basically a wave of magnetic and electrical and magnetic fields. This means that it has a lot of the properties of a wave. The wavelength corresponds to its colour, and the wave height (amplitude) corresponds to its brightness.

If you imagine waves in the sea hitting a small gap in a wall, the waves will spread outwards, this effect is called diffraction.

If you have two gaps in the wall you will get two circular wave patterns spreading out. In some areas a peak from one gap will always meet a wave peak from the other hole, the two waves add together producing particularly high waves 9bright light)

in other places the peaks from one wave will meet the troughs from the other wave, so the two waves cancel out and you are left with flat water (darkness).

In this setup the light and dark patches occur at particular angles, producing light and dark spots on a wall, in what is known as an interference pattern.

Diffraction from a point

Diffraction from 2 slits

If waves meet a thin gap in a wall (or laser light meets a small gap) the waves will spread out

If there are two gaps the waves will interfere producing larger waves (bright light) in some directions and smaller waves in others (darkness)


 In fact if the gap is wide compared to the wavelength of light (bigger than a 2000th of a mm) the waves going through the hole interfere with one another to form a pattern. the bigger the hole the closer the fringes are together. This is why the distance between the spots changed as you changed the angle of the laser.

Diffraction from a single slit

Diffraction through a wide slit

If the hole is larger the waves going through the hole interfere with one another forming a pattern. In this case a bright spot straight ahead.

The wider the hole the closer the bright spots or fringes are together in the pattern.



These are all very simple cases, but if you shine waves at any pattern then they will project a different one on the wall. In many cases this pattern is what you would expect to see (a shadow or something similar) but if you have many very small objects (such as silica gel which is made up of minute balls of silica, or a scrumpled up piece of cling film the patterns can be surprising and beautiful.

Why doesn't it work with normal light?

You do get diffraction effects with normal light, but they are much less pronounced, this is because normal light is much less coherent than laser light. This means that if you look at light at two different times or places, the waves will sometimes be in time constructively interfereing and others be out of time destructively interfering. This means that any interference pattern that is produced will change from microsecond to micosecond, and your eyes will only see the average of all possible patterns which we consider normal behaviour.

Normal single colour light

A single wavelength of normal light

2 bits of normal light

If you interfere it with another you find that they move in and out of phase at random. So any interference patterns will change with time.

Laser light

Laser light waves on the other hand move in time so the interference patterns are stable.

Normal light is still slightly coherent over a few wavelengths, so if you are dealing with very small structures only a few wavelengths across such as a bubble or oil film you can still see interference effects.

Dave Ansell


Related Content

Not working please enable javascript
Powered by UKfast
Genetics Society