Naked Science Forum

On the Lighter Side => Science Experiments => Topic started by: Naufal the B. S. on 18/07/2009 10:37:24

Title: How do you make a radio controlled device?
Post by: Naufal the B. S. on 18/07/2009 10:37:24

can I make radio control like radio control toys?
And, how it works?
I need it for move my aileron glider plane.

Title: Re: How do you make a radio controlled device?
Post by: RD on 18/07/2009 14:58:25

Quote

This is Aerosente's glider/sailplane resource page. Below you will find links to aircraft mfgs, build threads, build techniques, radio gear, parts, supplies, tools, articles, manuals, industry luminaries, clubs and forums.

http://www.aerosente.com/resources.html

Title: Re: How do you make a radio controlled device?
Post by: Naufal the B. S. on 19/07/2009 03:18:29

where is the link that tell about RC?

Title: Re: How do you make a radio controlled device?
Post by: RD on 19/07/2009 11:20:18

The forums below are all listed on the link I gave above (http://www.aerosente.com/resources.html)

http://www.wattflyer.com/forums/showthread.php?t=45173

http://www.rcgroups.com/forums/index.php

http://www.rcuniverse.com/index.cfm

http://www.forums.radiocontrolzone.com/

You’d be more likely to receive useful advice about RC in one of those forums dedicated to the subject .

Title: Re: How do you make a radio controlled device?
Post by: Naufal the B. S. on 20/07/2009 05:55:07

thank you...

Once again! Can I make radio control plane with wood, or acrylic? Not buy the parts. Build the aileron with it.

(sorry for my bad English, I'm Indonesian  [;)])

Title: How do you make a radio controlled device?
Post by: RD on 20/07/2009 12:17:59

Scratch building the frame from balsa wood and film from a plan would be possible by most enthusiasts.

But designing and constructing the electronics (RC & servos) from scratch would only be possible if you have a degree in electronic engineering.

A RC glider made from a kit of parts (balsa or foam) and ready-made RC modules and servos would be more likely to fly,
 even then success is not guaranteed … http://www.rcgroups.com/forums/showthread.php?t=529806

[Scratch build = to build from the raw materials, or most basic components, not prefabricated, entirely home-made].   

Title: How do you make a radio controlled device?
Post by: blaze22 on 10/08/2011 12:24:46

Quote from: Naufal the B. S. on 18/07/2009 10:37:24

can I make radio control like radio control toys?
And, how it works?
I need it for move my aileron glider plane.

Radio control toys are the toys that uses nano technology. All people can't make such toys. To make radio control toys, you need to be engineering minded person. If you are capable to understand mechanical engineering, electronics, programming skill then you can make such toys. However, efforts are not restricted. you can make your best effort if you think that you can make it. All the best!
-------------
http://www.radiospam.org