The Naked Scientists

The Naked Scientists Forum

Author Topic: What makes a surface reflective?  (Read 1984 times)

David

  • Guest
What makes a surface reflective?
« on: 26/04/2010 23:30:02 »
David asked the Naked Scientists:
   
Recent shows have described how wet tee shirts become transparent, but how is reflectivity explained on a molecular level, such as in a mirror?

David in Australia

What do you think?
« Last Edit: 26/04/2010 23:30:02 by _system »


 

Offline jrussell

  • First timers
  • *
  • Posts: 8
    • View Profile
What makes a surface reflective?
« Reply #1 on: 28/04/2010 16:19:37 »
perhaps a less porous surface allows less light to pass through, therefore bouncing light back, as a reflection?
 

Offline Soul Surfer

  • Neilep Level Member
  • ******
  • Posts: 3345
  • keep banging the rocks together
    • View Profile
    • ian kimber's web workspace
What makes a surface reflective?
« Reply #2 on: 28/04/2010 23:11:39 »
Two criteria are required for a surface to be fully reflective (like a mirror) to electromagnetic radiation.  Firstly the surface should be electrically conducting (probably metallic).  Secondly irregularities on the surface should be significantly smaller than the wavelength of the radiation. it follows that the lower the frequency the easier it is for a surface to be reflective and above a frequency limit in the low X ray frequencies the gaps between the atoms are large enough to prevent reflection and no surfaces made of normal materials can be reflective.
 

Offline JP

  • Neilep Level Member
  • ******
  • Posts: 3366
  • Thanked: 2 times
    • View Profile
What makes a surface reflective?
« Reply #3 on: 29/04/2010 03:43:43 »
Once you have a smooth conducting surface, like Soul Surfer explained, reflection occurs because the electrons in a material can be pushed around easily by the incoming electromagnetic light wave.  When electrons move around, they emit electromagnetic waves.  The wave emitted by all the electrons moving around is the reflected wave.
 

Offline techmind

  • Hero Member
  • *****
  • Posts: 934
  • Un-obfuscated
    • View Profile
    • techmind.org
What makes a surface reflective?
« Reply #4 on: 30/04/2010 20:59:32 »
This is actually a very deep and interesting question.

I don't claim to know all the answers, but have given it quite some thought in the past.

I think the point about electrical conductivity can be further clarified in the case that the material is not a complete/bulk conductor. A surface can be reflective to a given frequency (wavelength) of electromagnetic radiation if that material is conductive (or contained conducting traces/threads) over lengths of the order of several wavelengths, and the gaps between the conducting traces or threads are less than about 1/4 to 1/5th of a wavelength. The material can be a near-perfect reflector even if it is full of holes... as long as the holes are a small fraction of the wavelength.
Hence why you can have holes in the 'window' of your microwave oven without the microwaves leaking out.
« Last Edit: 30/04/2010 21:02:01 by techmind »
 

The Naked Scientists Forum

What makes a surface reflective?
« Reply #4 on: 30/04/2010 20:59:32 »

 

SMF 2.0.10 | SMF © 2015, Simple Machines
SMFAds for Free Forums