Naked Science Forum
General Science => General Science => Topic started by: another_someone on 28/06/2007 15:32:39
-
http://environment.newscientist.com/channel/earth/dn12141-giant-microwave-turns-plastic-back-to-oil.html
Giant microwave turns plastic back to oil
17:44 26 June 2007
NewScientist.com news service
Catherine Brahic
A US company is taking plastics recycling to another level – turning them back into the oil they were made from, and gas.
All that is needed, claims Global Resource Corporation (GRC), is a finely tuned microwave and – hey presto! – a mix of materials that were made from oil can be reduced back to oil and combustible gas (and a few leftovers).
Key to GRC’s process is a machine that uses 1200 different frequencies within the microwave range, which act on specific hydrocarbon materials. As the material is zapped at the appropriate wavelength, part of the hydrocarbons that make up the plastic and rubber in the material are broken down into diesel oil and combustible gas.
GRC's machine is called the Hawk-10. Its smaller incarnations look just like an industrial microwave with bits of machinery attached to it. Larger versions resemble a concrete mixer.
"Anything that has a hydrocarbon base will be affected by our process," says Jerry Meddick, director of business development at GRC, based in New Jersey. "We release those hydrocarbon molecules from the material and it then becomes gas and oil."
Whatever does not have a hydrocarbon base is left behind, minus any water it contained as this gets evaporated in the microwave.
Simplified recycling
"Take a piece of copper wiring," says Meddick. "It is encased in plastic – a kind of hydrocarbon material. We release all the hydrocarbons, which strips the casing off the wire." Not only does the process produce fuel in the form of oil and gas, it also makes it easier to extract the copper wire for recycling.
Similarly, running 9.1 kilograms of ground-up tyres through the Hawk-10 produces 4.54 litres of diesel oil, 1.42 cubic metres of combustible gas, 1 kg of steel and 3.40 kg of carbon black, Meddick says.
Watch a video of tyre powder being reduced by the Hawk-10 (http://www.carbonrecovery.com/Videos_GRC.asp).
Less landfill
Gershow Recycling, a scrap metal company based in New York, US, has just said it will be the first to buy a Hawk-10. Gershow collects metal products, shreds them and turns them into usable pure metals. Most of its scrap comes from old cars, but for every ton of steel that the company recovers, between 226 kg and 318 kg of "autofluff" is produced.
Autofluff is the stuff that is left over after a car has been shredded and the steel extracted. It contains plastics, rubber, wood, paper, fabrics, glass, sand, dirt, and various bits of metal. GRC says its Hawk-10 can extract enough oil and gas from the left-over fluff to run the Hawk-10 itself and a number of other machines used by Gershow.
Because it makes extracting reusable metal more efficient and evaporates water from autofluff, the Hawk-10 should also reduce the amount of end material that needs to be deposited in landfill sites.
-
Any info on energy consumption, George?
-
Any info on energy consumption, George?
You know as much as I do.
-
Wow George that is the coolest thing I have heard in a long time.. How safe is this thing to run for the people running it.. Is there increased risks to their health or are all the microwaves safely kept inside. I always assumed that a certain amount gets to us..does it?
-
He was one ecited man.. LOL I loved his face after he was done.. good demonstration ... I wonder what the elapsed time was in between when he went to the computer and started it and when it was finished and he opened it up!.. Very cool!