1
Just Chat! / Re: Small 230 volt AC generator using neodymium magnet spheres hobby
« on: 05/07/2017 17:55:18 »
ok, here are the details
How to make a simple generator (simple model generator)
Step 1.
Materials:
1. 3V Dc motor – inside toys which using two batteries 1.5 V AA – simple generator component
2. coil without core inside syncronous motor 230 V – A4 laminators, microwave turntable motor – simple generator component
3. neodymium magnet sphere 12.7/13 mm – simple generator key component
4. neodymium screw pot metal case 12.7/13 mm – remove neodymium magnet from the metal case – simple generator component
5. plastic conector used to fix screw pot metal case – dc motor ax inside car toys – heat the crew pot metal case to fix the plastic conector – simple generator component
6. plastic and metal components from mechanical construction kit – used to build the holder for dc motor and coil – simple generator holder
7. 3.7 V battery 600 mAh or a related battery
8. 230 V led bulb 3W – 7 W + E 27 socket 230 V 9. power switch + wires Step 2. Remove the magnet from the neodymium screw pot metal case Remove the coil from the syncronous motor Step 3. Assamble all the components ( you can use different coils, different dc motors, magnet spheres, srew pot metal case and batteries)
9. power switch + wires
Step 2.
Remove the magnet from the neodymium screw pot metal case Remove the coil from the syncronous motor
Step 3. Assamble all the components ( you can use different coils, different dc motors, magnet spheres, srew pot metal case and batteries)
Important!
the position neodymium magnet sphere 12.7 mm – screw pot metal case (magnetic catch ) between magnetic poles (N and S)
Do not use magnetic materials (screws , etc ) for the simple generator holder near the neodymium sphere – it will act like a magnetic brake for the sphere
tsted bulbs 3w - 75w ....230 v
all my tests are on my website I am not alowed to enter it here....
How to make a simple generator (simple model generator)
Step 1.
Materials:
1. 3V Dc motor – inside toys which using two batteries 1.5 V AA – simple generator component
2. coil without core inside syncronous motor 230 V – A4 laminators, microwave turntable motor – simple generator component
3. neodymium magnet sphere 12.7/13 mm – simple generator key component
4. neodymium screw pot metal case 12.7/13 mm – remove neodymium magnet from the metal case – simple generator component
5. plastic conector used to fix screw pot metal case – dc motor ax inside car toys – heat the crew pot metal case to fix the plastic conector – simple generator component
6. plastic and metal components from mechanical construction kit – used to build the holder for dc motor and coil – simple generator holder
7. 3.7 V battery 600 mAh or a related battery
8. 230 V led bulb 3W – 7 W + E 27 socket 230 V 9. power switch + wires Step 2. Remove the magnet from the neodymium screw pot metal case Remove the coil from the syncronous motor Step 3. Assamble all the components ( you can use different coils, different dc motors, magnet spheres, srew pot metal case and batteries)
9. power switch + wires
Step 2.
Remove the magnet from the neodymium screw pot metal case Remove the coil from the syncronous motor
Step 3. Assamble all the components ( you can use different coils, different dc motors, magnet spheres, srew pot metal case and batteries)
Important!
the position neodymium magnet sphere 12.7 mm – screw pot metal case (magnetic catch ) between magnetic poles (N and S)
Do not use magnetic materials (screws , etc ) for the simple generator holder near the neodymium sphere – it will act like a magnetic brake for the sphere
tsted bulbs 3w - 75w ....230 v
all my tests are on my website I am not alowed to enter it here....
The following users thanked this post: chris